Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            A.W. Sperry DSA-2007: (1 year) CAL VER /5520
DATE:                  11-Sep-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.1 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       7
NUMBER OF LINES:       67
CONFIGURATION:         Fluke 5520A
STANDARD:              Fluke 5500A/COIL
=============================================================================
#
# Compatibility:
#   5500/CAL 5.0 or MET/CAL 5.0 or later.
#
# Subprocedures:
#   None
#
# Required Files:
#   2007v_52.bmp
#   20074z52.bmp
#   2007lc52.bmp
#   2007hc52.bmp
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5520A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  DISP         {Procedure not formally tested with UUT.}
  1.001  DISP         {See procedure README file.}
  1.002  ASK-                        P                            F        V
  1.003  ASK+           K                              X
  1.004  STD          Fluke 5500A/COIL
  1.005  HEAD         PRELIMINARY INSTRUCTIONS
  1.006  DISP         Warm-up time: NONE
  1.006  DISP         Temperature: 25 +/- 5degC
  1.006  DISP         Humidity: <75%
  1.007  DISP         [32]                WARNING
  1.007  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.007  DISP         of this calibration.  DEATH ON CONTACT may result if
  1.007  DISP         personnel fail to observe safety precautions.
  1.008  HEAD         {RESISTANCE}
  1.009  DISP         Set the FUNCTION/RANGE switch to OHMS.
  1.010  PIC          20074z52
  1.011  5520         190.0Z         1.5% 0.2U                             CW
  2.001  5520         10Z                                               S  CW
  2.002  EVAL   Is an audible tone present {(Continuity test OK)}?
  3.001  HEAD         {AC VOLTAGE}
  3.002  PIC          2007v_52
  3.003  HEAD         AC VOLTAGE: {750V Range}
  3.004  5520   750   700V           1% 2U         60H            SI       2W
  4.001  HEAD         AC VOLTAGE: {200V Range}
  4.002  5520   200   100.0V         1% 2U         60H            SI       2W
  5.001  HEAD         {AC CURRENT}
  5.002  DISP         Set the FUNCTION/RANGE switch to 200 AMPS.
  5.003  PIC          2007lc52
  5.004  HEAD         AC CURRENT: {200A Range}
  5.005  5520   200   100.0A         1.5% 0.4U     60H            SI       T5
  6.001  HEAD         AC CURRENT: {600A Range}
  6.002  PIC          2007hc52
  6.003  5520   600   500A           1.5% 2U       60H            SI HC    T5
  7.001  END